STOLEN - 2 Boards on 8/20/05 - Maryland Shore

[xis]

Please see pictures and descriptions of 2 STOLEN SURFBOARDS at http://stevesabia.com/stolen/

Hi All -
I'm a longtime (20+ years) surfer, kiter, sailboarder from the DC/Balto area surfing MD, VA, NJ, New England, OBX, etc. for years. My surfboards (see LINK above) were STOLEN off my car at ASSATEAGUE NATIONAL SEASHORE in MARYLAND, Saturday, Aug 20. Why couldn't the good gawd of wind and waves allow me to catch these phuckas in the act with pipe in hand? dunno.

PLEASE look closely at the LINK and keep an eye out for 'em in the
water. They are pretty unique homebuilt boards -- real easy to
spot/verify: MY NAME "Steve Sabia" is GLASSED into the bottom on the stringers, between the fins.

Please PASS THIS ON to anyone who rides and hates THIEVES. Let's catch these idiots.

$200 reward for boards, $500 for arrest ... holding them 'til I get
there to pound them? PRICELESS.

BOARD DESCRIPTIONS:
(http://stevesabia.com/stolen/zzzLargeImageToPrint.jpg)

6'8 TEARDROP TRI-FIN w/SSD 2005 LOGOs
- clear with orange SSD 2005 logo on deck; 4 B&W SSD logos on bottom (3 near nose, 1 near tail)
- orange deck pad
- blunted tip/nose
- round boxy rail
- square tail
- NEW condition
(I just finished building this one - never got to ride it!)

7'3 PIG FISH SWALLOWTAIL
- thick & wide board with fat nose
- square-ish hard rail
- swallow tail
- deck graphics: metallic blue chevron, upside-down-V-shaped yellow band and 4 yellow triangles
- channel in deck
- black deck pad
- bottom is clear
- board is yellowed
see: http://stevesabia.com/stolen/2-stolenBoard7-3-foto.jpg

thanks,
Steve

410-923-5424
stevesabia@yahoo.com

[RbGar]

Steve, I saw your post on Lee's website in OCMD. We hate board stealing fuckers up here and we'll keep our eyes open for ya. :yup:

That's one hell of a rocker jig you got going on there :rockon:

[jonchino]

Steve, I saw your post on Lee's website in OCMD. We hate board stealing fuckers up here and we'll keep our eyes open for ya. :yup:

That's one hell of a rocker jig you got going on there :rockon:


yeah thats pretty rocker thing of a jig.. i might have to built another

[xis]

thanks guys. yea it looks like the under side of yer sink but that thing is amazingly handy... you can use it to copy and then tweek an existing rocker, or design a new one. I use it as a rocker table when glassing XPS and EPS boards I shape flat. You can also take it apart and use the sides with narrow strips on em as guides to hot wire cut rockers in EPS foam and I've thought about using it to copy and template outline curves. It's just 2 - 2x4s, with holes on 6" incs bored thru and split down the middle and bolts with wing nuts between holes to tension/lock the pvc pipes in place.

Steve

[SBT]

www.surfboard-tracker.com

[SBT]

www.surfboard-tracker.com

[samboard]

ok man, we get it, thanks! what you should do is advertise with the site, that would be much better and it wouldn't come off as spam.

sam

[jonnyb]

whats good does that tracker do unless it has gps?

[Bonezee]

When these stains are caught cut off their feet so they no can surf.